|
PRODUCT
INFORMATION
 Olde
Style Danish Oil
Description Designed to highlight and
finish timber with a warm colour/character enhancement and attainment of
traditional patina results. A pure, natural plant oil product formulated to
better reflect the original, heavy-oil mixes that gave "Danish Oil" its renown.
Will not go off in can after opening (shelf-life several years providing
contaminants are not introduced - decanting prior to use is recommended). Once
dry, is both FOOD and CHILD-SAFE.
Uses Internal (only) woodworking,
furniture, joinery and other non-traffic feature timbers such as wall/ceiling
panelling and exposed beams. NOT for FLOORING or BENCHTOP use.
Special Notes This product is not
fully ingredient-considerate of wet-areas (bathroom/laundry etc.) ORGANOIL
GARDEN FURNITURE OIL, with its anti-fungal oils and bees wax additives, would
best address timbers in these locations. For quality finishing with ply-wood
projects carry out the final wax polishing advocated (1 coat oil, left to dry,
light sand, then 1 or 2 applications of wax as set out below).
Appearance Will result in a clear,
light wet-look. As an indication, lightly dampen raw wood with water to
appreciate oil's propensity to amplify the inherent colours and woodgrain.
Patina/Shine With modest preparation
and application effort you only achieve a modest, MATT finish. Should you
conduct finer preparatory sanding and advised friction-on-application/buffing
procedure, high SATIN results are achievable.
Staining This product is a
penetrative, clear oil finish and should NOT have other-brand
pigments/colourants added to it.
Sizes available 500ml, 1 ltr, 4 ltr
& 10 ltr cans. For availability visit website home page.
|
Coverage |
1st Coat |
2nd Coat/Re-coat |
|
Softwoods |
5-9 sq. metres/litre
|
8-12 sq. metres/litre
|
|
Hardwoods |
10-14 sq. metres/litre |
18-20 sq. metres/litre |
|
(lower parameters of coverage are for
rough-sawn/higher parameters for dressed) |
Preparation 1. For best quality
results on furniture/joinery, further dry-sand through the grits to say 6-1200
(the finer the better!). Commencing grits are relevant to original
surface supplied. 2. Ensure timber surfaces are clean and dry - remove
sawdust, metal filings etc. from on or near the timber prior to oiling. 3.
If access to rear/underside surfaces are available prior to (or after)
installation, apply 1 coat to such areas to facilitate all-round moisture
protection (preparatory sanding of such areas is not necessary).
Application 1. Ensure you have read
& understood aforementioned usage, notes and preparation advice first. If
skin-sensitive wear oil-impervious gloves. Ensure good ventiliation. 2.
Apply with brush or lambswool applicator 2 (two) coats only, & 24 hours
apart, (1 only when rejuvenating existing oiled timber). Special note: It would
also only be 1 (one) application of oil should you be intending to conduct a
Wax-Polishing final finish. 3. (OPTIONAL) For higher patina: with each
application, and prior to next step 4, friction-rub oiled surfaces with white,
synthetic pad/s 4. It is ESSENTIAL that within ½ to 1 hour of EACH
application (and when rejuvenating) you firmly dry-cloth off excess
oil/residues to ensure a non-tacky, non dust-collecting surface! 5. Power
buffing with lambswool pad (a further 24-48 hrs after last oiling) would again
contribute to patina. 6. Now leave finished project to fully cure/air-dry
for 5-7 days (avoiding spills or use).
Clean up Hot soapy water or Gum
Turpentine.
Maintenance To clean your oiled
timber, or prior to re-application, wipe over surfaces with solution of warm
water and methylated spirits - use with synthetic scourer for difficult to
remove grime. Re-oil (ONE coat) as necessary. If having wax finished do NOT oil
again, wax only.
Waxing Should you be seeking the pale
satin and tactile response that wax finishes deliver, we recommend the use of
ORGANOIL'S Natural Wax & Polish (as instructed), though allow minimum 14
days curing/drying period of oil application to elapse.
Bottom Line Given Olde Style DANISH
OIL'S parameters of use and exposure, we cannot understand the need for
chemicals and synthetics. This product well-addresses your health (chemical
exposure, indoor air quality etc.), the timber's needs, and, with a bit of
input from yourself, warm patinas and quality, long-lasting results. Finally,
you are not excused from referring to can's instruction label for other
storage, disposal, health and safety considerations.

|