VOLVOX PRODUCT INFORMATION

Volvox ProAqua Enamel

An opaque covering, water based, oil and acrylic-free, satin paint for interior or exterior metal or wood surfaces. Free from chemical solvents (VOC free). It is manufactured from natural raw materials that have minimal impact on the environment. Great for doors, window frames, furniture, shelving, skirting boards, fascia boards, cladding, garden furniture and other smooth planed wood.

Ingredients
Water, earth pigments, mineral filling material, vinegar ester, titanium dioxide, preservatives.

Application
Reduce the first coat with 5-10 % water. Apply evenly and sparingly. A light sanding is advisable after the first coat has dried (grain size 180 - 240). Thereafter apply one to two undiluted coats. VOLVOX ProAqua Enamel can be applied by brush, roller or spray gun. Do not paint in temperatures below 8°C or above 30°C, immediately after rain, fog or frost or when these conditions are forecast.

Coverage
Depending on the pigmentation and the surface properties, 0.75 litre will cover 10 to 12 square metre. 2.5 litre will cover 35 to 40 square metres. Average use is 70-90 millilitres per square metre.

Drying
Depending on room temperature and relative humidity, the product will be normally touch dry after 15-30 minutes and ready for sanding after 45 minutes. The surface can be painted over after about 2 hours.

Clean Up
With water, away from drains.

ProAqua ENAMEL Designer Colour Range