VOLVOX PRODUCT INFORMATION

ProAqua Transparent Wood Finish

VOLVOX ProAqua Transparent Wood Finish can be used on windows, doors, pergolas, timber cladding, and other wood that should be protected interior and exterior. Depending on the pigment concentration it can appear transparent up to opaque.

Transparent Wood Colours
Available in transparent wood colours of UV-Natural (exterior only) Clear (interior only), Pine, Walnut, Oak, Mahogany, Teak, White, Ebony, Citrus Yellow, Corn Yellow, Oriental Red, Meadow Green and Mondrian Blue.

Environment and Health Features
VOLVOX ProAqua Transparent Wood Finish is made from natural and non-toxic raw materials. Manufacturing process ensures ecological sustainability and avoids water pollution. No chemical solvents are used. The product will not charge electro static energy. When used according to manufacturer's direction, the product can be considered as harmless to human and the environment. Certified V.O.C. free (TüF Essen 3.2-3/02).

Ingredients
Water, earth pigments, mineral filling materials, vinegar ester, preservatives.

Application
Reduce VOLVOX ProAqua Transparent Wood Finish with 5-10% water. Stir well and apply and spread evenly. Use lacquer roller and/or paint brush and/or airless or Aircoat spray applicator. Let dry for at least one hour, then sand slightly (120-180 grid). Second coat can be applied undiluted, reduce with 5 - 10 water if necessary. After drying, sand again. For exterior wood protection, at least three coats are recommended. Do not apply in temperatures below 10°C or above 30°C.

Drying and recoating
Depending on temperature and humidity, touch dry within 15 minutes, dry to sand and repaint after 1 hour.

Coverage
Depending on surface condition 0.75 litre for approx. 10 m², 2.5 litre for approx. 33 m² per coat

Clean up
Clean tools with soapy water after use away from drains.

Maintenance
Check vanish from time to time for aggressive pollution deposits and clean when necessary. If water repels, that's an indication that the VOLVOX ProAqua Transparent Wood Finish is intact, if it doesn't its time to rejuvenate. Clean surface and slightly sand then simply apply another coat.